Zinc (Zn)

List of Products Treated

Zinc Ingots, Special High Grade, SHG (min. purity 99.995% Zn)

Zinc Ingots, High Grade, HG (min. purity 99.95% Zn)

Zinc Ingots, Good Ordinary Brand, GOB (min. purity 98.50% Zn)

  • A) Saves, old zinc die cast scrap

    Shall consist of miscellaneous old zinc base die castings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings. All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible. Material containing in excess of 30% iron will not constitute good delivery

  • B) Scabs, new zinc die cast scrap

    Shall consist of new or unused, clean, zinc base die castings. Castings to be unplated, unpainted, and free from corrosion.

  • C) Scope, new plated zinc die cast scrap

    Shall consist of new or unused clean, plated zinc base die castings, free from corrosion.

  • D) Score, old scrap zinc

    Shall consist of clean dry scrap zinc, such as sheets, jar lids, clean unalloyed castings and anti-corrosion plates. Borings and turnings are not acceptable. Material must not be excessively corroded or oxidized. All foreign attachments and extraneous materials are deductible.

  • E) Screen, new zinc clippings

    Shall consist of any new pure zinc sheets or stampings free from corrosion. To contain no foreign material or attachments. Printers zinc, such as engravers zinc, lithograph sheets and addressograph plates subject to special arrangements. Printers zinc to be free of routings.

  • F) Scrub, hot dip galvanizers slab zinc dross, Batch Process

    Shall consist only of galvanizers unsweated zinc dross in slab form from hot dip galvanizing (Batch Process) with a minimum zinc content of 92% and shall be free of skimmings and tramp iron. Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment. Slabs shall not weigh over 100 pounds each. Heavier pieces acceptable upon mutual agreement between buyer and seller. Material from continuous galvanizing operation is not acceptable. Blocks are acceptable upon mutual agreement.

Would you like to know more about Alex metals and its activities

You need to refresh the page in order to update following charts (if there is any update).